5 W/cm2, and 240 s. The nanowires were straight and long (10 to 50 μm) with a well-defined square cross section. In this work, with suitable chosen parameters, the same experimental setup can be used to grow BiNPs. Compared to the growth of BiNWs, the deposition time and the power density to grow BiNPs are much lower. We were

able to deposit BiNPs of various sizes by controlling the deposition time, as the buy Vorinostat diameters are directly proportional to the deposition time, and only a single layer of BiNPs are grown on the glass surface. Also, we further analyzed the sample quality and the absorption property in a statistical method. Methods According to past experience, temperature is the most important factor to grow either a thin film, nanowires, or nanoparticles. Based on this, our strategy Small molecule library datasheet is to separate the experiment into three stages, which starts from searching for the best growth temperature. The first stage

(experiment A) was to deposit Bi at several different temperatures, while keeping the power density and the deposition time fixed at 0.12 W/cm2 and 60 s, respectively. The second stage (experiment B) was to focus on the relationship between the particle diameter and the deposition duration. We deposited BiNPs with different deposition durations ranging from 10 to 60 s, with the deposition temperature find more maintained at 200°C and the power density at 0.12 W/cm2. The grain sizes of BiNPs were estimated by using a scanning electron microscope (SEM), and the bandgaps were determined by using the extrapolation method through measuring the visible-light absorption spectrum. The final stage (experiment C) was to deposit BiNPs on sapphire and ITO-coated glass (ITO glass) substrates. The reason why we choose these substrates as a part of our experiment is their possibility to fabricate linear or nonlinear optical devices for further applications. For example, different substrates can act as a light filter if we are interested in utilizing BiNPs to be convex lens for lasers. We used Corning NADPH-cytochrome-c2 reductase glass (Corning Inc., Corning, NY, USA) as our substrates in experiments A and B. Prior to deposition, all substrates (6 × 8 mm2) were ultrasonically

degreased in acetone and alcohol for 10 min to remove contaminants, followed by rinsing in de-ionized water and drying under N2 flow. For all samples used in these three experiments, the argon pressure was maintained at 3 mTorr, the distance between the Bi target and substrate was 20 mm during growth, and a subsequent cool down process at a rate of −8°C/min brings the sample back to room temperature. The surface morphology was examined by a LEO 1530 field emission SEM (LEO Elektronenmikroskopie GmbH, Oberkochen, Germany). Structural characteristics were measured by using the high-resolution X-ray diffraction (XRD) method with a Bede D3 diffraction system and a Mac Science M21X X-ray generator (MAC Science Co., Ltd., Yokohama, Japan).